Forklift Attachments San Jose - Forklift attachments make a variety of jobs possible. The wide range of forklift attachments make most jobs not only possible but also safer and quicker. In addition to general forklift training, operators must be properly training for each attachment they intent to use.
Forklift attachments come in a wide variety of hydraulic and non-hydraulic attachments. The benefits of utilizing a forklift attachment include decreasing:
1. Employee accidents;
2. Damage to stock;
3. Manpower;
4. Time; and
5. Fuel consumption.
Equipment Considerations
Forklift attachments can replace existing attachments or may be added to a machine that doesn’t already have one. There are many equipment factors to consider prior to adding or replacing any forklift attachments. Considerations include the carriage type, the forklift model, the capacity of the forklift and the number of hydraulic functions used to power the features of the attachment.
Failure to properly consider these factors will increase the safety risk associated with operation of a forklift and its attachments and increase the risk for damage to the forklift, the attachment and surrounding area, including stock. There are further safety issues to take into consideration which can be discussed in more detail below.
Forklift Rating and Re-Rating
Forklifts are given lift capacity ratings by the manufacturer which will need to be adjusted if adding or changing a forklift attachment. Online calculators are available from manufacturers of forklift attachment’s to provide estimates on every attachments’ lifting capacity. However, only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. There will be a new specification plate that is factory authorized once the forklift manufacturer has re-rated the machine. This new specification plate will replace the original plate and should be installed showing the new rating for the forklift.
Equipment Upgrades
Forklift attachments rely on the machine’s hydraulic function and are made up of a forklift valve that has a lever situated close to the operator. This creates two passages of pressurized hydraulic oil for powering the attachment features. Note that not every attachment is hydraulic; however, the hydraulic attachments provide more features compared to the number of valves the forklift offers. In these instances, one or more valves need to be added. There are numerous ways a valve can be added. The manufacturers of forklifts create accessories to simplify hose and valve routing. Due to the cost of labor and parts required, this process may not be practical. Alternative methods include adding a solenoid valve in conjunction with a hose or cable reel that diverts oil flow from an existing function. Unfortunately, hose and cable reels can sometimes block the operator's view and can be easily damaged. There are kits available that use a solenoid valve and specialty hoses that allow for the reinforced braid to double as an electrical conduit. Because these hoses replace the existing hoses housed in the forklift, the hoses are safe from damage while keeping the operator’s field of vision clear.
Safety Considerations
Before using any type of forklift attachment, adequate training must be fulfilled. An operator must be competent in the fitting, operating and removal of the attachment.
Before using any forklift attachment, two safety issues need consideration.
First, any attachment on a forklift will reduce its nominal load rating, as mentioned above. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Secondly, the forklift’s center of gravity will be affected when any forklift attachment is added. Obviously, the stability of the forklift is reduced. Due to the attachment weight being situated in front of the fulcrum point, the forklift needs to be driven as though it is partially loaded even when it is empty. Operators need to travel gently and slowly every time they use an attachment and take extra care while turning. Check the forklift’s capacity to ensure that every attachment is listed on the data plate.
To maintain safety, special checks need to be completed before using any forklift attachment. The forklift attachment needs to be the right one for the type of forklift being used, appropriate for the load at hand, correctly attached, locked in place and permitted on the data plate of the forklift.
List of Common Forklift Attachments
Discover a list of common forklift attachments and how they are utilized below. There are many more attachments available than are listed here but this will cover the most widely-used. Forklift attachments are designed to increase job efficiency for many applications.
SIDESHIFTER:
The operator can manipulate the forks laterally with a sideshifter. This allows for easier load placement without having to move the entire forklift.
FORK POSITIONERS:
The fork positioners adjust for different loads by moving the forks together or apart in relation to each other.
DIMENSIONING DEVICES:
Dimensioning devices offer cargo dimensions to create more warehouse efficiency and better truck and trailer space. This is commonly used with billing systems that record volume.
ROTATOR:
A rotator helps to straighten tilted skids and handle custom load requirements and fast unloading. Many attachments include a rotator feature.
ROLL AND BARREL CLAMP:
Allows for grasping of load with a rounded shape, such as rolled material and barrels, often with various pressure setting to avoid damage to more fragile materials. These attachments sometimes also have a rotate function to assist with, for example, rotating an item from a horizontal to a vertical position.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Pole attachments are long metal poles in place of the forks. They are useful for picking up linoleum and rolled up carpet or similar items.
SLIP SHEETER OR PUSH-PULL:
Allows operator to transport slip sheets by clamping onto slip sheets, as opposed to pallets, and either pulling the slip sheet onto wide and thin metal forks for loading or pushing the slip sheet to unload. Some variations of the attachment are Save, where the slip sheet is removed for reuse, or Standard.
DRUM HANDLER:
The drum handler is specifically designed to transport drums. It might feature arms to hold the drum or be a spring-loaded model to grip the top lid.
DRUM AND STORAGE BIN TIPPER:
Allows for quick transfer of loose or liquid contents in large containers.
MAN BASKET:
The man basket is a lift platform to allow workers to complete jobs with brackets and railings and safety harnesses.
TELESCOPIC FORKS:
Allows operation in a warehouse using two pallet stacking where one shelf is placed directly behind another with no aisle between the two.
SCALES:
Scales are helpful for allowing operators to transport pallets while weighing them. This stops the need for interrupting work with regular travel to the scales. It can be used in legal-for-trade weights for operations that bill by how much items weigh.
SINGLE-DOUBLE FORKS:
Single-double forks facilitate movement of a single platform or pallet or two side-by-side pallets. This is useful for transporting specialty items with the right attachments employed. It can be used with normal lifting tasks and stops the need for owning two separate machines. This greatly reduces the cost of maintenance and operation that is used with multiple forklifts.
SNOW PLOW:
Designed for snow removal and distribution but can also be used to move other types of loose material.
SKIPS:
Skips facilitate fast and safe removal of waste to the proper waste or skip compactor. Skips are either a bottom-emptying model or a roll-forward type.
BOOMS AND JIBS:
Jibs and boom offer extended forklift reach for transporting loads that are stacked deep or high or that are suspended. There are reach-over, low profile, precision lifting and extendable length options.
Forklift Attachment PDF
