It is really different to use a stand-up lift truck compared to a sit-down model. The way you transport and lift loads as well as your movements are completely different. If you do not have proper training for operating a stand-up unit, you could probably cause harm co-employees or to yourself. When operating a stand-up model, you need to follow the correct safety regulations. There are some basic operating standards that should be met when operating a stand-up unit.
When starting, stand up on the forklift in order to get a feel for the steering knob and the controls. The steering is handled with the knob steering plate instead of a steering wheel. Take note that this knob moves very fast, thus, you must get used to moving it gently in order to be sure not to over steer. The horn is situated on the control handle, like with the control for the movement of the forks and for backwards, forwards. The floor pedal enables the machine to move.
Turn the key to start the equipment's engine if you are ready to begin. The forks must be retracted at this stage. If you are moving around the floor, the forks should be pointed a little upwards. Never drive with extended forks. If you are traveling forwards, move the control handle forward and step on the pedal in order to make the lift move forward. If you are backing up, be sure to beep your horn to alert those around you. Look behind you before stepping on the pedal in order to make sure the path is safe and clear. Then, pull the control handle towards you while stepping on the pedal. Always stay focused and alert and make sure that you are always operating in a safe way.
When approaching a corner with the lift truck, turn the steering knob towards the direction you are heading. Make sure to keep your foot on the accelerator and keep your hands on the control handle. When turning right, the steering knob would move in a clockwise direction while moving forward. If you are turning left, your steering knob would go in a counter-clockwise direction.
The stand-up units take some getting used to, particularly if you have only utilized sit down units. With some training and taking some time to know the machinery, you could handle loads quickly and efficiently in little time.